 |
|
|
|
|
|
|
|
|
|
460ESKY
50cc nipper
Joined: 12 Feb 2010
Posts: 47
Location: murray bridge s.a.
|
 Posted: Tue Jan 11, 2011 12:03 pm Post subject: yfz450 oil? |
  |
|
| hey all just looked at a mates 04 450 and was wondering how much oil it should hold it's been sitting a couple weeks and the oil only just shows on the dip stick in the reservoir does the oil drain to the crank case when sitting or is it really low on oil it had some oil around the fill hole on th crank case do these run the same oil for motor and box if so how much and wat does everyone recommend hope this makes sense cheers |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
brettski
Blaster class
Joined: 03 Jun 2008
Posts: 190
|
| Posted: Tue Jan 11, 2011 5:56 pm Post subject: |
|
|
did u warm the motor up before you checked the level? takes about 250ml in the crank case and about 1.55L in the resovior tank. Same oil for motor and box. I use Yammalube, seems to do the job
Last edited by brettski on Tue Jan 11, 2011 5:57 pm; edited 1 time in total |
|
| |
|
|
|
|
|
|
|
|
460ESKY
50cc nipper
Joined: 12 Feb 2010
Posts: 47
Location: murray bridge s.a.
|
| Posted: Tue Jan 11, 2011 5:57 pm Post subject: |
|
|
| no motor hadn't been started for a week or so |
|
| |
|
|
|
|
|
|
|
|
brettski
Blaster class
Joined: 03 Jun 2008
Posts: 190
|
| Posted: Tue Jan 11, 2011 5:58 pm Post subject: |
|
|
| warm it up before checking it, thats probably why it seemed low |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
