 |
|
|
|
|
|
|
|
|
|
Mus1985
50cc nipper
Joined: 20 Feb 2010
Posts: 25
|
 Posted: Mon Aug 09, 2010 6:51 pm Post subject: Reverse light stays on |
  |
|
hey, got a 660 Raptor, when at idol reverse light is off, when it has a few revs on it, the light comes on. What should I look for? It stays on when going forward and in neutral.
Sam |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
SX Quad
4fiddy Racer
Joined: 25 Apr 2008
Posts: 203
Location: Kalgoorlie
|
| Posted: Tue Aug 10, 2010 9:52 am Post subject: Reverse Light |
|
|
Reverse limiter perhaps - try cleaning the clutch perch and park brake block set up. Most people install a block off plate and then disconnect the park brake and wires and install an aftermarket clutch lever.
Does it stutter when you rev it? if so the reverse limiter is kicking in. Do a search on here and you should find some common answers.
_________________
660R mine
300 Grizzly Hers
90R Little T |
|
| |
|
|
|
|
|
|
|
|
TBR 927
Blaster class
Joined: 07 Jul 2010
Posts: 112
Location: Perth WA
|
| Posted: Fri Aug 13, 2010 3:00 pm Post subject: |
|
|
Hey mate,
You prob already fixed it but mine used to do the same thing i hated it
we changed the whole wiring harness & it was still doing it
We earthed out the 2 netrul & reverse lights and it stopped it only thing is you dont have is any lights cause all it is, is that if the lights are flashing its telling your cdi that your in reverse so when i took away the lights i could reverse at full noise haha bit of fun
i had many of dnf s with a lot of endro s cause of this issue
we figured out it was the reverse cable just pulling its really touchy if its just on it turns on the light make sure its not tight
Hope you got it sussed |
|
| |
|
|
|
|
|
|
|
|
Mus1985
50cc nipper
Joined: 20 Feb 2010
Posts: 25
|
| Posted: Sun Aug 15, 2010 4:17 pm Post subject: |
|
|
Hey, thanks heaps...I don't have a park brake on it so will try the things you guys have said...thanks again!
Sam |
|
| |
|
|
|
|
|
|
|
|
TBR 927
Blaster class
Joined: 07 Jul 2010
Posts: 112
Location: Perth WA
|
| Posted: Mon Aug 16, 2010 3:00 pm Post subject: |
|
|
No worries sam
Any query s PM me like i said i know what your going through
Where you based ?
I have a lot of 660 parts for sale its on the site if your interested
Cheers Brett |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
