 |
|
|
|
|
|
|
|
|
|
raff
50cc nipper
Joined: 31 May 2010
Posts: 3
|
 Posted: Mon May 31, 2010 8:57 pm Post subject: polaris front cv boots |
  |
|
have a polaris 500ho had left hand front cv boot come off after playing in mud my question is what is the best way to get the clamp tight enough so the cv boot dosent come off again its simalar to a cable tie sort of thing but loses tension when you let it go  lany advice would be much appreciated |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
Overlord
4fiddy Racer
Joined: 17 Jan 2007
Posts: 272
|
| Posted: Wed Jun 02, 2010 2:59 pm Post subject: Special Pliers |
|
|
Mate, I think there is a special pair of pliers that tighten those clamps and you will need a new clamp as well.
Regards Overlord |
|
| |
|
|
|
|
|
|
|
|
raff
50cc nipper
Joined: 31 May 2010
Posts: 3
|
| Posted: Wed Jun 02, 2010 7:10 pm Post subject: special pliers |
|
|
| thanks for that overlord you wouldnt know where i could buy the pliers and clamp from? |
|
| |
|
|
|
|
|
|
|
|
Eddy_03Banshee
Blaster class
Joined: 16 Aug 2009
Posts: 118
|
| Posted: Wed Jun 02, 2010 9:16 pm Post subject: boots |
|
|
i work at hardy spicer. do lot of cv's do need special tool. but if got room just use hose clamp. we use zip ties at work
_________________
Just wanna go fast
05 Pred 500
03 Banshee
08 Raptor 250 |
|
| |
|
|
|
|
|
|
|
|
Overlord
4fiddy Racer
Joined: 17 Jan 2007
Posts: 272
|
| Posted: Thu Jun 03, 2010 8:06 am Post subject: CV Joint |
|
|
Mate I think you can get them from most good tool shops or bearing shops. I dont think there that expensive. I think Ed's idear is a good one on the short term for an emergencey fix but you want to do it right for the long term. CV's can get expensive. Mate if you ever blow a CV make sure you go to an autmotive CV specialist first because 9/10 they can rebuild your CV at a fraction of the cost of a new one. Best of luck.
Regards Overlord |
|
| |
|
|
|
|
|
|
|
|
elmerkit
90cc 2 stroke / 110 4 stroke
Joined: 13 Apr 2010
Posts: 60
|
| Posted: Thu Jun 03, 2010 3:29 pm Post subject: |
|
|
A good pliers will do the job, just make sure to secure it well.
_________________
"Invest with atv parts that are reliable and inexpensive." |
|
| |
|
|
|
|
|
|
|
|
Eddy_03Banshee
Blaster class
Joined: 16 Aug 2009
Posts: 118
|
| Posted: Thu Jun 03, 2010 6:42 pm Post subject: |
|
|
i had look today i have pliers at work u can borrow them if need be. As overlord said about new cv. hardy spicer sell alot and really good prize or cbc
_________________
Just wanna go fast
05 Pred 500
03 Banshee
08 Raptor 250 |
|
| |
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
|
| |
|
|
|
|
|
|
|
|
raff
50cc nipper
Joined: 31 May 2010
Posts: 3
|
| Posted: Mon Aug 09, 2010 9:50 pm Post subject: |
|
|
| thanks every1 for your reply might have a look @ the website petew has found thanks for the offer Eddy_03 might get myself some of those pliers |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
