Noy Q75
Roostin Away
Joined: 16 Nov 2007
Posts: 943
Location: Perth W.A.
 |
 Posted: Sun Sep 05, 2010 7:59 pm Post subject: Kill switch Brackets |
  |
|
Hello guys i have made the item below for both my Yamahas and it makes life easyier for 2 reason (i think this will only work for the yamaha set up ) it mounts onto the park brake/clutch mounting post and it holds your kill switch and saves alot of room on the handle bars, plus there is a hole drilled into the back of it so you only have to remove the 2 top screws to undo that little allen key on the back of the kil switch to clean the contacts.they also mount straight on with no mods and even the same screws that come on the park brake/clutch. i hand make these one at a time.
I can make these for people who would like them for $20each plus postage they come with the screws to mount the kill switch and also powder coated black ..
If you are intrested please drop me a P.M.
_________________
Sponsors ,Cullys Yamaha,Pirtek Malaga
2x YFZ 450r "09" 2x 90 Raptor "09"2x 125Raptors "12"
N# 1 Aus Quad Nats Vets 2010
N# 1 at BSA-HD for 09,10,11
N# 2 W.A. State Clubman A 2010
N# 3 W.A. State Vets 2011
N# 1 W.A. State Vets 2012 |
|
