 |
|
|
|
|
|
|
|
|
|
~MUNGUS~
50cc nipper
Joined: 09 Feb 2009
Posts: 45
Location: Newcastle
|
 Posted: Fri Apr 23, 2010 8:06 pm Post subject: Advice please on banshee jetting with aftermarket gear?? |
  |
|
| Hey i have an 07 banshee with DmC alien pipes, pro design foam filter with stock air box and lid, v-force 3 reeds and boost bottle just wondering if anyone can give me some idea of where to start with jet sizes and clip position you have tried or recommend?? thanx |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
1sick6
Big Bore, Stroked & Bling +
Joined: 20 Dec 2006
Posts: 340
Location: SA
|
| Posted: Sat Apr 24, 2010 12:31 am Post subject: |
|
|
Just put 290 mains in and it should work fine.
_________________
He Who Dies With The Most Toys, Wins
 |
|
| |
|
|
|
|
|
|
|
|
morebloodymoney
90cc 2 stroke / 110 4 stroke
Joined: 30 May 2008
Posts: 92
Location: Mundubbera QLD.
|
| Posted: Sat Apr 24, 2010 10:54 am Post subject: |
|
|
| I'd start at 290 mains also and work down. I'd say she would be rich if your still running your airbox lid but go from there. Do a plug chop also and that will let you know if your rich or lean, better to be a little rich than lean though. Lean can = bang!!!! which then will = $$$$$$$$$$$$$. Did the pipes come with jets , when i bought my pt mids they came with jets (260-290) and a clip height which gave me a good idea to start at. |
|
| |
|
|
|
|
|
|
|
|
Mart 300r
Roostin Away
Joined: 02 Jun 2008
Posts: 944
|
| Posted: Sat Apr 24, 2010 11:40 am Post subject: |
|
|
Be very wary of just relying on a plug chop to determine if its lean or rich, All that will tell you is if your to lean or rich on your main jet.Alot of blow ups happen coming off full throttle then it goes back on to pilot circuit and this is when all hell happens.also needle type, clip height,theres alot to consider mate.
_________________
1984 ATC 300R, 1986 TRX 500R,1984 ATC 200X, ATC 70 WITH CUSTOM LAYDOWN 250R ENGINE, 125CC CUSTOM THUMPSTER TRIKE |
|
| |
|
|
|
|
|
|
|
|
~MUNGUS~
50cc nipper
Joined: 09 Feb 2009
Posts: 45
Location: Newcastle
|
| Posted: Sun Apr 25, 2010 7:41 pm Post subject: |
|
|
| Cheers for the help, rebuilding the top end so i will have to wait to get the settings right. thanx again |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
