OZ ATV :: The Australian ATV Forum

[adamATV]

Hi guy’s great forum and hoping you can help
I have search for this and also on goggle but can’t really find the answer so here goes.

I brought a new 110 chinse import quad for the kids (well maybe also for me)
I have followed the run in instructions and have no done the first service, oil changes and check all bolts.
It recommended 10-40 oil that i have used 500ml (also in the book)

At this point i also removed the screw governor form the throttle and went for a ride. I gave it all she had and it went like a rocket for about 5 mins i road it like this not open 100% all the time just on the straight parts
I then had a great power slide and noticed it bogged down tried again and same thing bogged down so i took it back to the shed and it would not even open up 100% down the straight.

This is the first time I have tried to open up the throttle all the way due to the run in and it has been great during this time, it is esy to start and even tho was governed it run like a dream it still does I just want it to go as fast as it can

So the question is what I need to check
It is a fresh tank of fuel straight from the servo so it is not that (i would hope)

I am ok with the mechanics but just a little unsure where to start i was thinking of getting a new spark plug tomorrow.
I have check fuel to the carbie and this flows fine
The air filter is still in new condition and it has not seen any water or even much dust.
i have but the governor back in it is fine it idles and runs great i just can't open it to what i want!

There was no warranty or return on the bike so i would like to sort it out.

Thanks in advance for your help
Adam