 |
|
|
|
|
|
|
|
|
|
The Two Stroke Smoker
Roostin Away
Joined: 03 Jul 2007
Posts: 541
Location: mid pack
|
 Posted: Thu Jul 09, 2009 5:56 pm Post subject: axle |
  |
|
How to get off stuck axle bolts?
_________________
YFZ450
And the longest hours I've had in my life
Were the ones I went through to know I was right
So I'm safe but I'm a little outside
I'm gonna laugh when I'm buried alive |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
Noy Q75
Roostin Away
Joined: 16 Nov 2007
Posts: 943
Location: Perth W.A.
|
| Posted: Thu Jul 09, 2009 6:01 pm Post subject: |
|
|
lots of CRC and let soak over night / put a impact socket over the nut and belt with a hammer a few times to loosen it a bit / or if its stuffed and rounded use a chissel and slowly belt the side of the nut (with chissel and hammer),it will split the nut or make it spread and come loose.
_________________
Sponsors ,Cullys Yamaha,Pirtek Malaga
2x YFZ 450r "09" 2x 90 Raptor "09"2x 125Raptors "12"
N# 1 Aus Quad Nats Vets 2010
N# 1 at BSA-HD for 09,10,11
N# 2 W.A. State Clubman A 2010
N# 3 W.A. State Vets 2011
N# 1 W.A. State Vets 2012 |
|
| |
|
|
|
|
|
|
|
|
The Two Stroke Smoker
Roostin Away
Joined: 03 Jul 2007
Posts: 541
Location: mid pack
|
| Posted: Thu Jul 09, 2009 6:05 pm Post subject: thanks |
|
|
I will give that a go. Thanks for the help
_________________
YFZ450
And the longest hours I've had in my life
Were the ones I went through to know I was right
So I'm safe but I'm a little outside
I'm gonna laugh when I'm buried alive |
|
| |
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Thu Jul 09, 2009 6:41 pm Post subject: |
|
|
Air Chisel if its real knackered... if its the lock nut of course, if its a hub nut (on the end of the axle) then a long breaker bar (I've had up to 4ft bar on one) will do the job
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
Quad
The Day Starts With OZATV !
Joined: 22 Oct 2006
Posts: 2773
Location: UP FRONT
|
| Posted: Thu Jul 09, 2009 6:42 pm Post subject: |
|
|
| come around and ill remove it 4 u . got the tools to do this. |
|
| |
|
|
|
|
|
|
|
|
The Two Stroke Smoker
Roostin Away
Joined: 03 Jul 2007
Posts: 541
Location: mid pack
|
| Posted: Thu Jul 09, 2009 6:46 pm Post subject: Ok |
|
|
You home tomorrow? Im on RDO
_________________
YFZ450
And the longest hours I've had in my life
Were the ones I went through to know I was right
So I'm safe but I'm a little outside
I'm gonna laugh when I'm buried alive |
|
| |
|
|
|
|
|
|
|
|
cowchaser
The Day Starts With OZATV !
Joined: 14 Feb 2006
Posts: 1618
Location: Warrnambool
|
| Posted: Thu Jul 09, 2009 10:36 pm Post subject: |
|
|
Use a big hammer, if that dont work then get a bigger hammer and so on. I use that theory for alot of things
_________________
Smitty |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
