 |
|
|
|
|
|
|
|
|
|
skidplate
Blaster class
Joined: 19 Oct 2008
Posts: 109
|
 Posted: Fri Sep 25, 2009 8:26 am Post subject: nerf bars ?floating (LTR450) |
  |
|
Hello, I need advice.
I have BlingStar nerfs.
The nerf is really attached to the chassis by one bolt at the rear above the foot pocket.
the mid portion and front are sliding over tubes mounted to the chassis.
QUESTION: Should I drill the peg support (through the nerf and the tube that replaced the original peg) and put a bolt through it ?
Cheers |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
Linc
Roostin Away
Joined: 17 Feb 2006
Posts: 999
|
| Posted: Fri Sep 25, 2009 9:44 am Post subject: |
|
|
| It sounds like the setup we had (not blingstar) and we just left it as it was. Raced 2 MX seasons with it like that. |
|
| |
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Fri Sep 25, 2009 10:32 am Post subject: |
|
|
Yes you should, at least at one end but preferably at both. If the bolt behinf the foot well comes out you'll lose the whole lot and they arent reall comfy to ride with out a foot peg.....
Linc your AC's were bolted at the front just not on the peg.
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
skidplate
Blaster class
Joined: 19 Oct 2008
Posts: 109
|
| Posted: Sun Sep 27, 2009 11:02 pm Post subject: |
|
|
Thanks for your replies.
Will go ahead with this mod. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
