OZ ATV :: The Australian ATV Forum :: View topic

OZ ATV :: The Australian ATV Forum
Australia's Largest ATV Forum

LTZ400 valve clearances

OZ ATV :: The Australian ATV Forum Forum Index -> Technical

View previous topic :: View next topic

buzzbro
Big Bore, Stroked & Bling +

Joined: 10 Dec 2006
Posts: 426
Location: QLD

Posted: Mon Oct 29, 2007 6:10 pm Post subject: LTZ400 valve clearances

Can anyone give me the specs for adjustment is it a hot or cold spec?I Any help appreciated Cheers Glenn _________________ I am old and wise because i survived young and stupid

Sponsor

Quad Squad
Blaster class

Joined: 05 Apr 2007
Posts: 193
Location: Melbourne

Posted: Mon Oct 29, 2007 6:30 pm Post subject:

Hi Glenn check them when its cold and the inlet should be .10-.20mm and exhaust .20-.30mm _________________ www.quadsquad.com.au Follow us on Facebook http://www.facebook.com/atvracetechnology

buzzbro
Big Bore, Stroked & Bling +

Joined: 10 Dec 2006
Posts: 426
Location: QLD

Posted: Mon Oct 29, 2007 6:54 pm Post subject:

Thanx Adam They are not shims i hope Cheers Glenn _________________ I am old and wise because i survived young and stupid

Quad Squad
Blaster class

Joined: 05 Apr 2007
Posts: 193
Location: Melbourne

Posted: Mon Oct 29, 2007 7:13 pm Post subject:

yep you will need the Ã˜9.48 shims...same as the 450's _________________ www.quadsquad.com.au Follow us on Facebook http://www.facebook.com/atvracetechnology

Display posts from previous:

	OZ ATV :: The Australian ATV Forum Forum Index -> Technical	All times are GMT + 10 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

OZATV.com managed by KPS