 |
|
|
|
|
|
|
|
|
|
Benzine
50cc nipper
Joined: 06 Feb 2006
Posts: 23
Location: Sydney NSW
|
 Posted: Mon Feb 06, 2006 8:56 pm Post subject: YFZ axle bearings |
  |
|
Noticed my bike wasnt riding as good as it normally does...found the axle housing bearings are flogged..any body else had this problem?..bike is only one year old
Kevin |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
Benzine
50cc nipper
Joined: 06 Feb 2006
Posts: 23
Location: Sydney NSW
|
| Posted: Tue Feb 07, 2006 8:56 pm Post subject: |
|
|
| Beech wrote: | | Kevin, we've always put a grease nipple in the bearing carrier this sorts it out real well. |
Great..thanks...
Kevin |
|
| |
|
|
|
|
|
|
|
|
PeteW
Moderator
Joined: 09 Feb 2006
Posts: 1877
Location: Doreen, Vic
|
| Posted: Thu Feb 09, 2006 12:27 pm Post subject: |
|
|
i alway put some anti seize in the axle where it fits into the bearings to. If you don't take your axle out regularly for greasing the bearings it will seize in the bearing and be a bitch to get out.
_________________
www.thumbpump.com
www.dirtcomp.com.au |
|
| |
|
|
|
|
|
|
|
|
trent
50cc nipper
Joined: 08 Feb 2006
Posts: 5
Location: wollongong
|
| Posted: Thu Feb 09, 2006 6:50 pm Post subject: |
|
|
i had the same thing with my 660 that it was about 2 years.then it let go .we put 2 grease nipples in the rear.
_________________
raptor 700 |
|
| |
|
|
|
|
|
|
|
|
discodanz
4fiddy Racer
Joined: 14 Aug 2006
Posts: 212
|
| Posted: Sat Oct 14, 2006 3:58 pm Post subject: |
|
|
| i had the same thing happen bike wasnt even a year old and i had a axle put in it 6 months prior ,, the grease nipple sounds like the go if not pull em out and grease them up every 3rd or 4th oil change and while your at it do the swing arm bearings aswell |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
