 |
|
|
|
|
|
|
|
|
|
Scout 250
90cc 2 stroke / 110 4 stroke
Joined: 30 Apr 2013
Posts: 58
|
 Posted: Sun Apr 13, 2014 6:08 pm Post subject: Wheel spaces |
  |
|
What do you guys think about wheel spaces? I've been doing a bit of reading and there are a lot of opinions.
Some say the handling and stabilty improves. That can't be bad.
Some say sub axles have been known to break wheels falling off etc.
From what I've read the breakages seem to happen for those that are doing a lot of jumps and racing. |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
t&l performance
The Day Starts With OZATV !
Joined: 07 Sep 2008
Posts: 1131
Location: perth
|
| Posted: Mon Apr 14, 2014 8:42 am Post subject: |
|
|
ive sold over 200 sets of billet spacers over 18 months theyve gone on side by sides kfx700s canams all the 450s and raptors and ive never had a come back
_________________
Australian dealer for
cuervo racing
stellar machine and racing
skat trak
jj&a
direct drive
fuel custom intakes
monster pipes
Toomey racing
and a lot more |
|
| |
|
|
|
|
|
|
|
|
driftingbanshee
Blaster class
Joined: 15 Oct 2013
Posts: 185
Location: Central Coast
|
| Posted: Mon Apr 14, 2014 6:44 pm Post subject: |
|
|
its very unlikely that you will break anything other than wheel studs but in saying that if you are running a spacer that is properly designed you will have no issues..
like this one
if you are jumping full time then run an extended axle |
|
| |
|
|
|
|
|
|
|
|
tblack6
50cc nipper
Joined: 16 Mar 2014
Posts: 7
Location: Melbourne
|
| Posted: Mon Apr 14, 2014 9:28 pm Post subject: |
|
|
I have ran wheel spacers before I was very nervous about using them but i never had a problem with them. I only used them on the front and never did jumps or anything like that with them.
_________________
2008 DS450
2009 TRX 450ER |
|
| |
|
|
|
|
|
|
|
|
Scout 250
90cc 2 stroke / 110 4 stroke
Joined: 30 Apr 2013
Posts: 58
|
| Posted: Tue Apr 15, 2014 6:49 am Post subject: |
|
|
| I find it interesting. Why did you only use from on the front wheels? How did it affect the handling? |
|
| |
|
|
|
|
|
|
|
|
noclue
50cc nipper
Joined: 01 Feb 2009
Posts: 12
|
| Posted: Sun May 25, 2014 12:24 pm Post subject: |
|
|
| Iv used some on jap utes, I doubt anyone could break a wheel spacer/axle on ATV because of type of tyres usually mounted. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
