 |
|
|
|
|
|
|
|
|
|
herbie
50cc nipper
Joined: 06 Aug 2010
Posts: 49
Location: sydney
|
 Posted: Fri Dec 09, 2011 8:22 pm Post subject: bore out? |
  |
|
| who to see to bore out 2 barrels for a kfx700 to 730 conversion. i'm in penrith but work in sydney. after quote at this stage. |
|
| |
|
|
|
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
|
|
herbie
50cc nipper
Joined: 06 Aug 2010
Posts: 49
Location: sydney
|
| Posted: Fri Dec 16, 2011 7:16 pm Post subject: |
|
|
| thanks for the support guys |
|
| |
|
|
|
|
|
|
|
|
kawboy
Big Bore, Stroked & Bling +
Joined: 06 May 2010
Posts: 343
Location: Agnes Water, QLD
|
| Posted: Fri Dec 16, 2011 8:20 pm Post subject: |
|
|
Any competent machine/engineering shop wont have a prob doing that job. Just make sure you give them the pistons you are going to run along with the clearance specs. When you get them back wash them real good and then rub the bores with a little oil on some paper towel until no more black comes out.
_________________
"Happiness is like peeing your pants, everyone can see it but only you can feel it"
LOONEY TUNED KFX 450R
LOONEY TUNED BRUTE 765
http://www.youtube.com/user/michealmannion?feature=mhum |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
